Cistermiser’s Vecta+ Sensor Shower Panel is lightweight, surface mounted, and pre-plumbed ready to be installed. With a hygienic non-touch sensor, this stylish design is easy to install and comes with options for mains or battery power, out of the box as standard. Configured with 8 litres per minute flow regulator installed, with the option to change to 6 litres per minute flow regulator in the box. With an anti-vandal feature, the flow rate is set for ~30 seconds, so these showers help to reduce wasted water, and save energy, while maintaining reliability and high performance.
With patented shower head nozzles, to reduce scale damage on the shower head, this shower delivers a rain effect shower experience. The slim and sleek design, with concealed fixings and thin shower panel body, can be mounted on any vertical surface and doesn’t require dismantling of the complete shower panel to perform general maintenance.
Features and Benefits
During normal operation, when the user brings their hand within 18cm of the sensor it will flash red once and water will flow from the shower head for 30 seconds. After 10 seconds, the user can stop the flow of water by bringing their hand back within 18cm of the sensor.
Here is a selection of documents, designed to ease specification and installation:
BIM objects are available for download from the NBS National BIM Library, in both Revit and IFC formats.
Click here to view Cistermiser products on the National BIM Library
Warranty Cover
Parts only warranty (no labour) for equipment purchased in the United Kingdom, Ireland, Isle of Man and the Channel Islands. Components of the unit which are proven to be faulty or defective in manufacture will be exchanged or repaired.
Warranty Period
1 Year from Date of Manufacture
Extended Warranty Period (available on Registration)
3 Years from Date of Installation
Extended Warranty Terms
To register and qualify for Extended Warranty cover, the Cistermiser product must be correctly installed with the Commissioning Checklist fully completed as itemised in the Installation Guide (included with the product), to demonstrate compliance with the product installation instructions.
Each Commissioning Checklist activity should be dated and additional warranty details provided to enable registration: product serial number, installation date, installation site address and the installer’s name and contact details.
Extended Warranty can be registered online (via the Warranty section of this website) or by completing and returning the Commissioning Checklist from the Installation Guide (included with the product) to this address: Cistermiser Ltd, Unit 1, Woodley Park Estate, 59-69 Reading Road, Woodley, Berkshire RG5 3AN.
Observation – The sensor is flashing red continuously
Action – Low battery. Change batteries
Observation – The sensor is not flashing at all when hands are in sensing range
Action – Battery power: Flat battery. Change batteries. Mains power: Poor DC contact. Check power transformer connection. No power. Check power supply / fuse
Observation – The sensor flashes red once when hands are in sensing range
Action – Water supply: Ensure water supply has been turned on and there is good working pressure. Minimum dynamic pressure 1 bar.
Action – Filter blockage: Check filter in inlet to solenoid valve.
Observation – The sensor is covered
Action – Anti-vandal mode has been triggered. The object/debris needs to be removed and the tap will resume normal functionality
Observation – Water is flowing when no user is present
Action – Water supply. Ensure water pressure is between 1 bar and 5 bar.
Action – Filters: Ensure filters are clear, clean if required. Debris in solenoid valve: Contact Cistermiser
Observation – Water flow diminishes following sensor activation.
Action – Filter is blocked with scale or debris. Check filter in the inlet valve.
Action – Flow regulator is blocked with scale or debris. Remove flow regulator from the shower, clean and reinstall.
Observation – Inconsistent flow rate following sensor activation
Action – TMV / water pressure issue: Ensure water supply to TMV is balanced and pressure is suitable for TMV specification.
Observation – Water temperature from show head is cold following sensor activation
Action – TMV / water pressure issue: Ensure water supply to TMV is balanced and pressure is suitable for TMV specification.
Ensure hot water pipes are insulated to minimise cold dead legs.
Not found the answers to what you’re looking for? We’re here to help!
Whether you need help with product support or installation advice, our dedicated support staff are on hand today.